Vortex Optics Viper Red Dot Sight - 6 MOA Dot
The Viper’s low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.
The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.
Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.
Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions; O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
Viper Red Dot - 6 MOA Dot (VRD-6)
The Viper Red Dot’s super-low mounting height makes it the perfect solution when there are no cutout slides. The Viper gives the simplicity and speed advantage of a dot sight, while co-witnessing with iron sights. The trade off? Nothing. The 6 MOA dot diameter gets on target fast.
Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery. The Viper comes with a Picatinny mount-weighs 2.1 ounces with mount.
6 MOA Dot Reticle
The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.
Up to 150 hours of use at highest setting.
Use at the more common lower settings can allow up to 30,000 hours.
Windage and Elevation Adjustment
The Viper features adjustable elevation and windage dials with 1 MOA marks.
To adjust the elevation and windage settings:
1. Loosen both Adjustment Lock 1½ turns.
2. Adjust dials up or down or left or right as indicated by arrows.
3. Re-tighten both locks after making adjustments.
Mounting the Viper
The Viper red dot is shipped from the factory with a low rail mount that clamps to both a Weaver or Picatinny rail.
1. Attach the low rail mount to the Viper using the included hardware.
2. Attach the Viper to the Picatinny base rail, making sure the recoil lug is solidly seated in the base groove.
3. Check to see that the clamp is fully down and hooked around the outside of the base.
4. Press the Viper down and forward and using the supplied hex wrench, firmly tighten down the clamp.
In addition to the supplied low rail mount, an optional riser mount is included.
The Viper Red Dot’s super-low mounting height makes it the perfect solution for use with cutout slides. Gives users the simplicity and speed advantage of a dot sight, while co-witnessing with stock iron sights. The trade off? Nothing. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR2032 battery.
- Product Name: Vortex Optics Viper Red Dot Sight - 6 MOA Dot
- Shop by Brand: Vortex
-
Description: The Viper Red Dot Sight has a super low-profile making it perfect for handguns with cut-out slides.
The Viper’s low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.
The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.
Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.
Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions; O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
Viper Red Dot - 6 MOA Dot (VRD-6)
The Viper Red Dot’s super-low mounting height makes it the perfect solution when there are no cutout slides. The Viper gives the simplicity and speed advantage of a dot sight, while co-witnessing with iron sights. The trade off? Nothing. The 6 MOA dot diameter gets on target fast.
Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery. The Viper comes with a Picatinny mount-weighs 2.1 ounces with mount.
6 MOA Dot Reticle
The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.
Up to 150 hours of use at highest setting.
Use at the more common lower settings can allow up to 30,000 hours.
Windage and Elevation Adjustment
The Viper features adjustable elevation and windage dials with 1 MOA marks.
To adjust the elevation and windage settings:
1. Loosen both Adjustment Lock 1½ turns.
2. Adjust dials up or down or left or right as indicated by arrows.
3. Re-tighten both locks after making adjustments.
Mounting the Viper
The Viper red dot is shipped from the factory with a low rail mount that clamps to both a Weaver or Picatinny rail.
1. Attach the low rail mount to the Viper using the included hardware.
2. Attach the Viper to the Picatinny base rail, making sure the recoil lug is solidly seated in the base groove.
3. Check to see that the clamp is fully down and hooked around the outside of the base.
4. Press the Viper down and forward and using the supplied hex wrench, firmly tighten down the clamp.
In addition to the supplied low rail mount, an optional riser mount is included.
The Viper Red Dot’s super-low mounting height makes it the perfect solution for use with cutout slides. Gives users the simplicity and speed advantage of a dot sight, while co-witnessing with stock iron sights. The trade off? Nothing. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR2032 battery.
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
save today! Unlock discounts, earn points, FREE shipping, and more with Caliber Nation savings. Start 30-day free trial
Out of stock
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
Shipping & Returns
All sellers will furnish tracking information for shipped products, whenever relevant. This tracking data enables you to keep tabs on the status of your shipment. If you purchase products from several sellers in one order, you will receive tracking information from each respective seller.
Following the dispatch of your order, Everest.com will send you an email notification containing the tracking details. Kindly ensure that the email address provided during the checkout process is accurate and up to date.
Returns are only accepted for products bought directly from Everest.com. To qualify for a return, the product must be unused, in its original condition, and with the original packaging intact. Some products may be exempt from the return policy. Should you wish to initiate a return, please reach out to the seller directly within 7 days from the date of delivery.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
Shipping & Returns
All sellers will furnish tracking information for shipped products, whenever relevant. This tracking data enables you to keep tabs on the status of your shipment. If you purchase products from several sellers in one order, you will receive tracking information from each respective seller.
Following the dispatch of your order, Everest.com will send you an email notification containing the tracking details. Kindly ensure that the email address provided during the checkout process is accurate and up to date.
Returns are only accepted for products bought directly from Everest.com. To qualify for a return, the product must be unused, in its original condition, and with the original packaging intact. Some products may be exempt from the return policy. Should you wish to initiate a return, please reach out to the seller directly within 7 days from the date of delivery.
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
The Viper’s low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.
The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.
Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.
Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions; O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
Viper Red Dot - 6 MOA Dot (VRD-6)
The Viper Red Dot’s super-low mounting height makes it the perfect solution when there are no cutout slides. The Viper gives the simplicity and speed advantage of a dot sight, while co-witnessing with iron sights. The trade off? Nothing. The 6 MOA dot diameter gets on target fast.
Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery. The Viper comes with a Picatinny mount-weighs 2.1 ounces with mount.
6 MOA Dot Reticle
The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.
Up to 150 hours of use at highest setting.
Use at the more common lower settings can allow up to 30,000 hours.
Windage and Elevation Adjustment
The Viper features adjustable elevation and windage dials with 1 MOA marks.
To adjust the elevation and windage settings:
1. Loosen both Adjustment Lock 1½ turns.
2. Adjust dials up or down or left or right as indicated by arrows.
3. Re-tighten both locks after making adjustments.
Mounting the Viper
The Viper red dot is shipped from the factory with a low rail mount that clamps to both a Weaver or Picatinny rail.
1. Attach the low rail mount to the Viper using the included hardware.
2. Attach the Viper to the Picatinny base rail, making sure the recoil lug is solidly seated in the base groove.
3. Check to see that the clamp is fully down and hooked around the outside of the base.
4. Press the Viper down and forward and using the supplied hex wrench, firmly tighten down the clamp.
In addition to the supplied low rail mount, an optional riser mount is included.
The Viper Red Dot’s super-low mounting height makes it the perfect solution for use with cutout slides. Gives users the simplicity and speed advantage of a dot sight, while co-witnessing with stock iron sights. The trade off? Nothing. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR2032 battery.
- Product Name: Vortex Optics Viper Red Dot Sight - 6 MOA Dot
- Shop by Brand: Vortex
-
Description: The Viper Red Dot Sight has a super low-profile making it perfect for handguns with cut-out slides.
The Viper’s low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy for shooters to access and adjust.
The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.
Hard anodized finish- highly durable low-glare matte finish. 1 MOA windage and elevation adjustments move the dot to your point of aim.
Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions; O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
Viper Red Dot - 6 MOA Dot (VRD-6)
The Viper Red Dot’s super-low mounting height makes it the perfect solution when there are no cutout slides. The Viper gives the simplicity and speed advantage of a dot sight, while co-witnessing with iron sights. The trade off? Nothing. The 6 MOA dot diameter gets on target fast.
Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery. The Viper comes with a Picatinny mount-weighs 2.1 ounces with mount.
6 MOA Dot Reticle
The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.
Up to 150 hours of use at highest setting.
Use at the more common lower settings can allow up to 30,000 hours.
Windage and Elevation Adjustment
The Viper features adjustable elevation and windage dials with 1 MOA marks.
To adjust the elevation and windage settings:
1. Loosen both Adjustment Lock 1½ turns.
2. Adjust dials up or down or left or right as indicated by arrows.
3. Re-tighten both locks after making adjustments.
Mounting the Viper
The Viper red dot is shipped from the factory with a low rail mount that clamps to both a Weaver or Picatinny rail.
1. Attach the low rail mount to the Viper using the included hardware.
2. Attach the Viper to the Picatinny base rail, making sure the recoil lug is solidly seated in the base groove.
3. Check to see that the clamp is fully down and hooked around the outside of the base.
4. Press the Viper down and forward and using the supplied hex wrench, firmly tighten down the clamp.
In addition to the supplied low rail mount, an optional riser mount is included.
The Viper Red Dot’s super-low mounting height makes it the perfect solution for use with cutout slides. Gives users the simplicity and speed advantage of a dot sight, while co-witnessing with stock iron sights. The trade off? Nothing. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR2032 battery.
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
