Vortex Optics Crossfire Red Dot Sight Gen II - 2 MOA Dot , Black
With up to a 50, 000 hour battery life and night-vision compatibility at the lowest two settings, the sight will keep working in a variety of conditions. The low and skeletonized lower 1/3 co-witness mounts provide vesatility for this lightweight optic.
The 2 MOA dot is quick to acquire in close-quarters, while remaining fine enough to promote pin-point accuracy at extended range. 11 illumination settings allows shooters to change the dot intensity to the situation at hand.
Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid transitions.
Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
2 MOA Dot Reticle
The daylight bright red dot is easy to see regardless of lighting conditions or background.
The key thing to remember with the Crossfire Red Dot is to keep both of your eyes open! Keeping both eyes open allows you to take full advantage of your peripheral vision.. Eye placement is not critical.
Windage and Elevation Adjustments
The Crossfire Red Dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle. 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial. Move the dials in the direction you wish the point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.
Mounting the Crossfire Red Dot
The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount.
Attach the unit to the rail/base with the illumination dial positioned on the right side.
Make sure the mount is solidly seated in the base groove. Position the Red Dot so you have at least four inches of eye relief.
Be sure the base clamp is hooked around the outside of the rail/base.
Press the Red Dot downward and forward. Then, firmly tighten the base clamp bolt using the hex wrench.
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
- Product Name: Vortex Optics Crossfire Red Dot Sight Gen II - 2 MOA Dot , Black
- Shop by Brand: Vortex
-
Description: The updated Crossfire is a no-nonsense sight for near any application and needs a simple point of aim and none of the frills, the Crossfire should be at the top of your list.
With up to a 50, 000 hour battery life and night-vision compatibility at the lowest two settings, the sight will keep working in a variety of conditions. The low and skeletonized lower 1/3 co-witness mounts provide vesatility for this lightweight optic.
The 2 MOA dot is quick to acquire in close-quarters, while remaining fine enough to promote pin-point accuracy at extended range. 11 illumination settings allows shooters to change the dot intensity to the situation at hand.
Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid transitions.
Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
2 MOA Dot Reticle
The daylight bright red dot is easy to see regardless of lighting conditions or background.
The key thing to remember with the Crossfire Red Dot is to keep both of your eyes open! Keeping both eyes open allows you to take full advantage of your peripheral vision.. Eye placement is not critical.
Windage and Elevation Adjustments
The Crossfire Red Dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle. 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial. Move the dials in the direction you wish the point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.
Mounting the Crossfire Red Dot
The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount.
Attach the unit to the rail/base with the illumination dial positioned on the right side.
Make sure the mount is solidly seated in the base groove. Position the Red Dot so you have at least four inches of eye relief.
Be sure the base clamp is hooked around the outside of the rail/base.
Press the Red Dot downward and forward. Then, firmly tighten the base clamp bolt using the hex wrench.
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
save today! Unlock discounts, earn points, FREE shipping, and more with Caliber Nation savings. Start 30-day free trial
Out of stock
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
Shipping & Returns
All sellers will furnish tracking information for shipped products, whenever relevant. This tracking data enables you to keep tabs on the status of your shipment. If you purchase products from several sellers in one order, you will receive tracking information from each respective seller.
Following the dispatch of your order, Everest.com will send you an email notification containing the tracking details. Kindly ensure that the email address provided during the checkout process is accurate and up to date.
Returns are only accepted for products bought directly from Everest.com. To qualify for a return, the product must be unused, in its original condition, and with the original packaging intact. Some products may be exempt from the return policy. Should you wish to initiate a return, please reach out to the seller directly within 7 days from the date of delivery.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
Shipping & Returns
All sellers will furnish tracking information for shipped products, whenever relevant. This tracking data enables you to keep tabs on the status of your shipment. If you purchase products from several sellers in one order, you will receive tracking information from each respective seller.
Following the dispatch of your order, Everest.com will send you an email notification containing the tracking details. Kindly ensure that the email address provided during the checkout process is accurate and up to date.
Returns are only accepted for products bought directly from Everest.com. To qualify for a return, the product must be unused, in its original condition, and with the original packaging intact. Some products may be exempt from the return policy. Should you wish to initiate a return, please reach out to the seller directly within 7 days from the date of delivery.
We prioritize serving those who serve nature. Everest represents the boundless outdoors. Find out how we give back.
Ready to wrestle Yetis over prices? Everest is up for the challenge with our Price Match guarantee.
meet marcus
The Story of Marcus Moose
In the vast wilderness the Everest marketplace, a legendary customer service character emerged—Marcus Moose. With a passion for the outdoors rivaling even the mightiest Yeti, Marcus's mission was clear: guide people to embrace nature's wonders. Marcus, the guardian of adventure, ensured no one was left behind. The wilderness awaits, and with Marcus by your side, your wildest dreams are just a hoofstep away.
With up to a 50, 000 hour battery life and night-vision compatibility at the lowest two settings, the sight will keep working in a variety of conditions. The low and skeletonized lower 1/3 co-witness mounts provide vesatility for this lightweight optic.
The 2 MOA dot is quick to acquire in close-quarters, while remaining fine enough to promote pin-point accuracy at extended range. 11 illumination settings allows shooters to change the dot intensity to the situation at hand.
Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid transitions.
Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
2 MOA Dot Reticle
The daylight bright red dot is easy to see regardless of lighting conditions or background.
The key thing to remember with the Crossfire Red Dot is to keep both of your eyes open! Keeping both eyes open allows you to take full advantage of your peripheral vision.. Eye placement is not critical.
Windage and Elevation Adjustments
The Crossfire Red Dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle. 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial. Move the dials in the direction you wish the point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.
Mounting the Crossfire Red Dot
The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount.
Attach the unit to the rail/base with the illumination dial positioned on the right side.
Make sure the mount is solidly seated in the base groove. Position the Red Dot so you have at least four inches of eye relief.
Be sure the base clamp is hooked around the outside of the rail/base.
Press the Red Dot downward and forward. Then, firmly tighten the base clamp bolt using the hex wrench.
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
- Product Name: Vortex Optics Crossfire Red Dot Sight Gen II - 2 MOA Dot , Black
- Shop by Brand: Vortex
-
Description: The updated Crossfire is a no-nonsense sight for near any application and needs a simple point of aim and none of the frills, the Crossfire should be at the top of your list.
With up to a 50, 000 hour battery life and night-vision compatibility at the lowest two settings, the sight will keep working in a variety of conditions. The low and skeletonized lower 1/3 co-witness mounts provide vesatility for this lightweight optic.
The 2 MOA dot is quick to acquire in close-quarters, while remaining fine enough to promote pin-point accuracy at extended range. 11 illumination settings allows shooters to change the dot intensity to the situation at hand.
Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid transitions.
Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
2 MOA Dot Reticle
The daylight bright red dot is easy to see regardless of lighting conditions or background.
The key thing to remember with the Crossfire Red Dot is to keep both of your eyes open! Keeping both eyes open allows you to take full advantage of your peripheral vision.. Eye placement is not critical.
Windage and Elevation Adjustments
The Crossfire Red Dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle. 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.
Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial. Move the dials in the direction you wish the point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.
Mounting the Crossfire Red Dot
The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount.
Attach the unit to the rail/base with the illumination dial positioned on the right side.
Make sure the mount is solidly seated in the base groove. Position the Red Dot so you have at least four inches of eye relief.
Be sure the base clamp is hooked around the outside of the rail/base.
Press the Red Dot downward and forward. Then, firmly tighten the base clamp bolt using the hex wrench.
When you need a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.
Welcome to the Everest Marketplace Seller Storefront, where we're on a mission to equip you with the gear that'll have you thriving in the great outdoors like a legendary Yeti. Whether you're into hunting, fishing, survival, or more, you've stumbled upon the right place!
Got questions about our products? Need to make a return or can't find what you're looking for? Reach out to us at 1-866-806-0934 or drop us a line at [email protected].
And hey, if you happen to be a seller with products listed under the Everest storefront, let's chat so we can match those items to your very own kingdom!
